Memory Batteries : All vendor : Lithium Battery Modules
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
This 2 cell lithium clock battery is an exact replacement for most older model Epson Equity series computers.
by Voltage 6.0
This 2 cell lithium clock battery is an exact replacement for most older model Epson Equity series computers.
This item has 3 inch wire leads to 2 pin connector.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
 Assembled in the USA
Part Code: B9630T
In stock, usually ships the same day
|
|
 |
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
Long life PC/AT battery with smaller physical dimensions for applications where space is limited.
by Voltage 7.2
Long life PC/AT battery with smaller physical dimensions for applications where space is limited.
this item has 8.5 inch wires, 4 pin connector and velcro mount.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
Assembled in the USA
Part Code: B9591TA
In stock, usually ships the same day
|
|
|
|
Clock Chip with Battery for Clock Memory for All vendor : Lithium Battery Modules |
|
by Voltage 3.0
Combination clock and configuration memory chip with internal battery. Direct replacement for Dalla DS12887 24 pin IC chip.
Part Code: DS12887A
In stock, usually ships the same day
|
|
|
|
Clock Chip with Battery for Clock Memroy for All vendor : Lithium Battery Modules |
|
by Voltage 3.0
Combination clock and configuration memory chip with internal battery. Direct replacement for Dallas DS1287 24 pin IC chip.
Part Code: DS12887
In stock, usually ships the same day
|
|
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
This 2 cell PC/AT battery is rated 6.0 volts and has a resistor for charge protection, 6.0 inch wires, 4 pin connector and velcro mount.
by Voltage 6.0
This 2 cell PC/AT battery is rated 6.0 volts and has a resistor for charge protection, 6.0 inch wires, 4 pin connector and velcro mount.
This item has 10.5 inch wires, 4 pin connector and velcro mount.
Maintains clock and configuration memory while machine is turned off.
Part Code: BR-E3C3BCA
In stock, usually ships the same day
|
|
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
Long life PC/AT clock battery contains a diode and resistor which prevents charging and controls voltage to the clock and configuration memory. The best choice if your motherboard has an external battery connector.
by Voltage 7.2
Long life PC/AT clock battery contains a diode and resistor which prevents charging and controls voltage to the clock and configuration memory. The best choice if your motherboard has an external battery connector.
This item has 10.5 inch wires, 4 pin connector and velcro mount.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
Part Code: B9591T
In stock, usually ships the same day
|
|
|
|
Lithium Wafer Cell for Industrial and Memory Applications for All vendor : Lithium Battery Modules |
|
This lithium wafer cell either solders directly to board or plugs into a socket.
by Voltage 3.6
This lithium wafer cell either solders directly to board or plugs into a socket.
High energy, high reliability 3.6 volt power source.
Excellent memory backup power source.
Low self discharge rate gives this cell a 10 year shelf life.
Extremely stable voltage and broad temperature range (-60?C to +85?C).
Part Code: TL-5135
In stock, usually ships the same day
|
|
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
This 2 cell lithium clock for IBM PC/XT and IBM PS/2 50, 60, 70, 80, 85 machines. Contains a diode and resistor to insure safety and long life. Has button contacts.
by Voltage 6.0
This 2 cell lithium clock for IBM PC/XT and IBM PS/2 50, 60, 70, 80, 85 machines. Contains a diode and resistor to insure safety and long life. Has button contacts.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
Assembled in the USA
Part Code: T223A
In stock, usually ships the same day
|
|
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
This single cell lithium clock battery is designed as an exact replacement for most Toshiba brand desktops.
by Voltage 3.6
This single cell lithium clock battery is designed as an exact replacement for most Toshiba brand desktops.
This item has 10.5 inch wires, 3 pin connector and velcro mount.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
Assembled in the USA
Part Code: B9632T
In stock, usually ships the same day
|
|
|
|
Lithium Battery for Clock Memory Support for All vendor : Lithium Battery Modules |
|
This single cell lithium battery replaces most 3.6 volt PC/AT batteries.
by Voltage 3.6
This single cell lithium battery replaces most 3.6 volt PC/AT batteries.
This battery requires a motherboard installed blocking diode. If you are not sure your motherboard has a blocking diode call us for best choice.
This item has 10.5 inch wires, 4 pin connector and velcro mount.
Maintains clock and configuration memory while machine is turned off.
This ENERGY+ item is assembled in the U.S.A. by American workers.
Part Code: B9593T
In stock, usually ships the same day
|
|
|
|
Lithium Wafer Cell for Industrial and Memory Applications for All vendor : Lithium Battery Modules |
|
This lithium wafer cell either solders directly to board or plugs into a socket.
by Voltage 3.6
This lithium wafer cell either solders directly to board or plugs into a socket.
High energy, high reliability 3.6 volt power source.
Excellent memory backup power source.
Low self discharge rate gives this cell a 10 year shelf life.
Extremely stable voltage and broad temperature range (-60?C to +85?C).
Part Code: TL-5186
In stock, usually ships the same day
|
|
|
|
Lithium Wafer Cell for Industrial and Memory Applications for All vendor : Lithium Battery Modules |
|
by Voltage 3.6
This lithium wafer cell either solders directly to board or plugs into a socket.
High energy, high reliability 3.6 volt power source.
Excellent memory backup power source.
Low self discharge rate gives this cell a 10 year shelf life.
Extremely stable voltage and broad temperature range (-60?C to +85?C).
Part Code: TL-5134
In stock, usually ships the same day
|
|
|
|
